Page 87
Keypad Options C
P5070E 1-32E Keypad Options C 1 = Enable Away Disarm at Keypad
(Default = All 1,2) 2 = Enable Stay Disarm at Keypad
Alarm Beeps & LED Control to Keypad
P73E 1-32E Keypad Beep/LED Options 1 = Mains Fail Beeps Keypad Buzzer Page 45
(Default = 5) 2 = Fuse Failure Beeps Keypad Buzzer
3 = Battery Low Beeps Keypad Buzzer
4 = Telephone Line Failure Beeps Keypad Buzzer
5 = System Tamper Alarm Beeps Keypad Buzzer
6 = Receiver Fail Beeps Keypad Buzzer
7 = Turn Off Keypad LED’s when Armed
8 = Turn Off Keypad & Backlight LED’s on Mains Failure
Keypad “ARM” Button Area Assignment
P74E 1-32E Keypad “ARM” Button Area 01-32 = “ARM” Button assigned to Area 1-32 Page 46
(Default = 1)
Keypad “ARM” Button Options
P75E 1-32E Keypad “ARM” Button Opts. 1 = “ARM” Button can Arm Page 46
(Default = 1,7) 2 = “ARM” Button can Stay Mode Arm
3 = “ARM” Button can Disarm at All Times
4 = “ARM” Button can Disarm Stay Mode at All Times
5 = “ARM” Button can Reset Alarms
6 = “ARM” Button can Arm Latchkey Mode
7 = “ARM” Button can Disarm During Exit Delay
8 = “ARM” Button can Disarm Stay Mode During Exit Delay
Keypad “STAY” Button Area Assignment
P76E 1-32E Keypad “STAY” Button Area 01-32 = “STAY” Button assigned to Area 1-32 Page 47
(Default = 1)
Keypad “STAY” Button Options
P77E 1-32E Keypad “STAY” Button Opts. 1 = “STAY” Button can Arm Page 47
(Default K/P 1,2,3,4,6,7,8 = 2,8) 2 = “STAY” Button can Stay Mode Arm
(Default K/P 5 = 2,4) 3 = “STAY” Button can Disarm at All Times
4 = “STAY” Button can Disarm Stay Mode at All Times
5 = “STAY” Button can Reset Alarms
6 = “STAY” Button can Arm Latchkey Mode
7 = “STAY” Button can Disarm During Exit Delay
8 = “STAY” Button can Disarm Stay Mode During Exit Delay
Keypad “A” Button Area Assignment
P78E 1-32E Keypad “A” Button Area 01-32 = “A” Button assigned to Area 1-32 Page 48
(Default = 1)
Keypad “A” Button Options
P79E 1-32E Keypad “A” Button Opts. 1 = “A” Button can Arm Page 48
(Default = 1,7) 2 = “A” Button can Stay Mode Arm
3 = “A” Button can Disarm at All Times
4 = “A” Button can Disarm Stay Mode at All Times
5 = “A” Button can Reset Alarms
6 = “A” Button can Arm Latchkey Mode
7 = “A” Button can Disarm During Exit Delay
8 = “A” Button can Disarm Stay Mode During Exit Delay
Keypad “B” Button Area Assignment
P80E 1-32E Keypad “B” Button Area 01-32 = “B” Button assigned to Area 1-32 Page 49
(Default = 2)
Keypad “B” Button Options
P81E 1-32E Keypad “B” Button Opts. 1 = “B” Button can Arm Page 49
(Default = All Off) 2 = “B” Button can Stay Mode Arm
3 = “B” Button can Disarm at All Times
4 = “B” Button can Disarm Stay Mode at All Times
5 = “B” Button can Reset Alarms
6 = “B” Button can Arm Latchkey Mode
7 = “B” Button can Disarm During Exit Delay
8 = “B” Button can Disarm Stay Mode During Exit Delay
Keypad to Output Mask (for Access Control)
P82E 1-32E Keypad to Output Mask 01-32 = The Keypad is linked to Output # 1-32 Page 49
(Default = All Off)
“Control” Button to Output Mask (for Access Control)
P83E 1-32E Keypad “Control” Button to Output Mask Page 50
(Default = All Off) 01-32 = The Keypad “Control” Button is linked to Output # 1-32
To Next Page
