Need help?Do you have a question about the Crown FM600 and is the answer not in the manual?
General| RF Output Power | 600 W |
|---|---|
| RF Output Impedance | 50 ohms |
| Audio Input Impedance | 600 ohms balanced |
| Cooling | Forced air |
| Modulation | FM |
| Frequency Range | 88-108 MHz |
| Dimensions | 483 x 133 x 400 mm |
Overview of the FM600 transmitter, its features, ease-of-use, and reliability.
Lists detailed technical specifications for the transmitter and exciter sections.
Introduces safety conventions, defines hazard levels (Danger, Warning, Caution).
Instructions for setting the transmitter's operating frequency using front panel switches.
Step-by-step guide for the initial startup and verification of the transmitter.
Instructions for setting the desired output power level.
Explanation of the front panel digital multimeter and selectable parameters.
Details the meaning of different fault indicator lights and their causes.
Procedures for adjusting pre-emphasis settings and fine-tuning audio.
Steps for adjusting stereo separation, composite output, and pilot signal.
Procedures for measuring, adjusting, and offsetting operating frequency.
Instructions for calibrating and setting power, SWR, and current limit displays.
Procedure for calibrating the sensitivity of the front panel modulation display.
Comprehensive list of parameters to measure for transmitter performance.
Information on returning products for repair or replacement and warranty service.
Contact details for 24-hour technical assistance and emergency help.
To Next Page
