Subcarrier Suppression 50dB below ±75 kHz deviation
FM S/N Ratio (FM noise)
Complete Transmitter Better than –60dB
Exciter only Better than –70dB
AM S/N Ratio Asynchronous and synchronous noise
better than FCC requirements
RF Bandwidth ±120 kHz, better than –35 dB
±240 kHz, better than –45 dB
RF Spurious Products Better than –71dB
Operating Environment Temperature (0
°C to 50°C)
Humidity (0 to 80% at 20°C)
Maximum Altitude (3,000 Meters;
9834 Feet
AC Power 120-240 volts* +/-10% 50/60Hz
Note: We set voltage and ampere requirements to assist you in designing your system. De-
pending on your operating frequency, actual requirements for maximum voltage and current
readings are 10–15% lower than stated.
Regulatory Type notified FCC parts 73 and 74
Meets FCC, DOC
Dimensions 32.38 x 59.69 x 62.23 centimeters
12.75 x 23.5 x 24.5 Inches
Weight 38 lbs
17.237 Kg
*200 volts AC input or greater, recommended for RF power output of 575W or greater. Voltage measured at the AC power input
connector to transmitter.
1-8 FM600 User’s Manual
To Next Page
Loading...
