CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
9. If original Network Processor App version is V2.18.4 or after, you can IGNORE this step
and jump to next step.
If original Network Processor App version is old and is V2.18.3 or before, after upgrading the
bootloader, the IP, subnet and Gateway table will be messed up. You need to correct that.
Press [Assignment] button and change the incorrect IP, subnet and gateway back such that
it will match your PC. After that, continue with the next step of installing the Network
Processor App.
To Next Page
Loading...