CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
7.4 Interface to Reader (C# Demo App)
User can connect to CSL RFID Reader (CS203 / CS468 / CS469) via Ethernet interface. It is the
default interface. For some CSL RFID Reader, USB and Serial (RS232) interfaces also available.
User should refer to the specification of CSL RFID Reader and check “Connectivity” before
changing the reader interface setting using the Demo App.
User can use C# Demo App to change the reader interface setting. Press “Set Interfac” button in
the Main Menu.
User can set the reader interface setting with option Ethernet / USB / Serial provided as follow.
Press “OK” to confirm.
To Next Page
Loading...