CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
10.4 RFID Processor Firmware Upgrade Procedure
Use MUST upgrade the firmware of Network Processor to the latest version before
upgrade firmware of RFID Processor. Please follow the chapter “Network Processor
Firmware Upgrade Procedure” in this document to do firmware upgrade for Network
Processor.
10.4.1 Procedure for CSL reader with RFID Processor App version
1.3.xx or 1.4.xx
1. User must check the RFID Firmware version before doing RFID Firmware upgrade. If the
RFID Firmware Vers is 1.5.xx, please refer to section “4.2 Procedure for CSL reader
with RFID Firmware App 1.5.xx”.
2. Please download the latest Firmware Upgrade tool from CSL website. The latest version is
"RFID FwUpgrade2.0.27.zip".
To Next Page
Loading...
Need help?
General