CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
6.11 Kill
This page demonstrates the Kill Tag operation.
Click “Click here to select a tag to destroy” to scan and select the tag
After the tag is selected, enter the kill password of the tag as below. If the kill password of the
tag is set as “00000000”, that means no password is set on the tag and it could not be killed.
Please write the password on the tag in “Read/Write” function first.
After that, click the “Kill Tag” button to kill the tag.
To Next Page
Loading...