CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
4) Click “Read” button to read the status of each block (64 bits) of the user memory
5) In order to change the lock status of a block, “Right-click” the block(s) you want to lock for
changing the lock status and then select “PermaLock”.
6) Make sure the correct Access Password is entered and then click “Lock” button to perma-lock
the block(s)
7) The blocks permalock status will be changed. Note that it is “Permanent Lock” on the
block(s), it cannot be unlock again.
To Next Page
Loading...