CSL CS468 User Manual

CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
50
After the security state is selected, enter the access password in “Access Password” field.
If the access password field of the tag is “00000000”, that means no password is set on the
tag and it could not be locked. Please write the access password on the tag in
“Read/Write” function first.
Click the “Apply Security” button to set the security on the tag’s memory bank(s).
6.10 User Perm-lock
In Tag Security, the “User Perm-lock” function is used for block-level (64 bits) Perma-lock of
tag’s user memory. This function is only applicable for new tag that complies to the EPC Class 1
Gen 2 Tag Specification v1.2 (e.g. Alien Higgs3). Moreover, this function is only support on
CS468 with firmware version 1.3.68 or above.

CSL CS468 Specifications

General

Brand	CSL
Model	CS468
Category	Rfid Systems
Language	English