CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
5.4 Changing IP Address
After initial unpacking and connecting to the CS468 reader using the default ex-factory device
and PC server IP address, the system integrator will need to change the IP address of the CS468
reader to the actual IP address at the site.
The IP Address of the reader can be changed using the Demo Application "C# Native Single
Reader on Windows OS with User Interface".
To Next Page
Loading...
Need help?
General