CSL CS468 - Pc Side Prerequisites; Default Ex-Factory IP Settings

CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
25
5.2 PC Side Prerequisites
To run the CS468 application programs, the PC must have the following software installed:
1) Dot Net Framework 3.5 or above
It is available in Windows 7 or above and it is downloadable from Microsoft website.
5.3 Default Ex-Factory IP Settings
CS468 is shipped out with the following default ex-factory IP settings:
Reader IP address:
IP = 192.168.25.203
Subnet Mask = 255.255.255.0
For the first connection to it, one can use a PC or a laptop, set it to the IP address in the same
subnet (e.g. 192.168.25.141 with subnet mask 255.255.255.0), then run the Demo Application in
the CS468 document package. On the applications, one can change CS468's IP address. This
is described in the next section.