CTC Union FMC-2000MS - Page 70

70
ctcPortStatisticsRx512to1023Pkts
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.12
ReadOnly
The number of received frames
with size within 512 to 1023 bytes.
ctcPortStatisticsRx256to511Pkts
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.11
ReadOnly
The number of received frames
with size within 256 to 511 bytes.
ctcPortStatisticsRx128to255Pkts
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.10
ReadOnly
The number of received frames
with size within 128 to 255 bytes.
ctcPortStatisticsRx65to127Pkts
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.9
ReadOnly
The number of received frames
with size within 65 to 127 bytes.
ctcPortStatisticsRx64Pkts
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.8
ReadOnly
The number of 64 bytes frames
received.
ctcPortStatisticsRxPauseFrames
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.7
ReadOnly
The number of pause frames
received.
ctcPortStatisticsRxBroadcastPkts
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.6
ReadOnly
Shows the number of received
(good and bad) broadcast packets.
ctcPortStatisticsRxMulticastPkts
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.5
ReadOnly
Shows the number of received
(good and bad) multicast packets.
ctcPortStatisticsRxUnicastPkts
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.4
ReadOnly
Shows the number of received
(good and bad) unicast packets.
ctcPortStatisticsRxOctets
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.3
ReadOnly
Shows the number of received
(good and bad) bytes. Includes FCS
but excludes framing bits.
ctcPortStatisticsRxPkts
.1.3.6.1.4.1.4756.189.20.11.1.5.1.1.2
ReadOnly
Shows the number of received
(good and bad) packets.
ctcPortControlStatisticsClearStatisticsClear
.1.3.6.1.4.1.4756.189.20.11.1.4.1.1.2
ReadWrite
Set to TRUE to clear the statistics
of an interface.
ctcPortStatusInformationSFPVendorSN
.1.3.6.1.4.1.4756.189.20.11.1.3.1.1.10
ReadOnly
Shows the SFP vendor Serial
Number.
ctcPortStatusInformationSFPVendorRev
.1.3.6.1.4.1.4756.189.20.11.1.3.1.1.9
ReadOnly
Shows the SFP vendor Revision.
ctcPortStatusInformationSFPVendorPN
.1.3.6.1.4.1.4756.189.20.11.1.3.1.1.8
ReadOnly
Shows the SFP vendor Product
Number.
ctcPortStatusInformationSFPVendorName
.1.3.6.1.4.1.4756.189.20.11.1.3.1.1.7
ReadOnly
Shows the SFP vendor name.
ctcPortStatusInformationSpeed
.1.3.6.1.4.1.4756.189.20.11.1.3.1.1.5
ReadOnly
Shows the current interface speed.
ctcPortStatusInformationFiber
.1.3.6.1.4.1.4756.189.20.11.1.3.1.1.4
ReadOnly
Shows whether interface is a fiber
link (fiber SFP or cu SFP).
ctcPortStatusInformationFdx
.1.3.6.1.4.1.4756.189.20.11.1.3.1.1.3
ReadOnly
Shows whether interface is
running in full duplex.
ctcPortStatusInformationLink
.1.3.6.1.4.1.4756.189.20.11.1.3.1.1.2
ReadOnly
Shows whether interface has link.
ctcPortJumbo
.1.3.6.1.4.1.4756.189.20.11.1.2.4
ReadWrite
If true the Jumbo Packet is
supported.
ctcPortLFP
.1.3.6.1.4.1.4756.189.20.11.1.2.3
ReadWrite
Link Loss Pass Through.
ctcPortAlsPowerOffPeriod
.1.3.6.1.4.1.4756.189.20.11.1.2.2.1.4
ReadWrite
The period is Tx laser power turn
OFF. The allowed range is 10 to 50
in tenths of seconds default period
is 30 in tenths of seconds (3
second).