User Guide DDOC0099-000-AH
DTS1 CSfC 12 - 42 Command Line Interface
© 2020 Curtiss-Wright Defense Solutions Revision 5.0
12.3.26 sens
Description
The sens command displays DTS voltage and temperature sensor readings.
Syntax
sens [-h | --help | --version]
sens [-S] [-T] [-V] [-p PERIOD]
Options
-h, --help............................Print help message.
--version............................Print program version.
-p PERIOD............................Refresh display every PERIOD milliseconds. Ctrl-C to exit.
-S...........................................View Advantech subset of sensors only
-T...........................................View Temperature subset of sensors only
-V...........................................View Voltage subset of sensors only
To Next Page
Loading...