USB VIRTUAL COM Setting the USB port as a virtual serial port:
Disabled
D
= virtual COM disabled
Enabled = virtual COM enabled
paragraph 4.3).
DHCP CLIENT Setting of the DHCP protocol:
Disabled
D
= protocol disabled
Enabled = protocol enabled
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
network.
TCP PRINTER PORT This parameter sets the TCP port number.
NOTE: This parameter is not printed on setup report.
SECURITY TYPE Security Protocol:
None
D
= protocol disabled
WPA = WPA protocol enabled
WPA2 = WAP2 protocol enabled
Wi-Fi SSID
Wi-Fi NET PASSWORD This parameter sets the password for Wi-Fi communication.
NOTE: This parameter is not printed on setup report.
TCP TIMEOUT (x10 s) This parameter sets the TCP timeout value expressed in seconds.
NOTE: This parameter is not printed on setup report.
45
To Next Page
Loading...
Need help?
General
