DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
TOS Priority Settings
Use the TOS Priority Settings menu to configure ToS priority mapping for Class of Service on the Switch. When a packet is
received containing this ToS tag, it will be mapped to the CoS queue configured here. These settings will only take effect if the
priority settings per port are configured for ToS.
Figure 8- 8. TOS Priority Setting
Select the TOS value from the pull-down menu and the Class ID of the priority level mapped to and click the Apply button. The
new mapping is displayed in the Port Priority Table below.
98
To Next Page
Loading...
