DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
SMTP Service
The following window is used to send test messages to all mail recipients configured on the Switch, thus testing the configurations
set and the reliability of the SMTP server. To access the following window, open the Administration folder, then the SMTP
Service Folder and click the SMTP Service link.
Figure 6- 58. SMTP Mail Service
The following parameters can be set:
Parameter Description
Subject
Enter the subject of the test e-mail.
Content
Enter the content of the test e-mail.
Once your message is ready, click Send to send this mail to all recipients configured on the Switch for SMTP.
72
To Next Page
Loading...
