DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Candidate Switch Icon
Figure 6- 45. Right Clicking a Candidate icon
The following options may appear for the user to configure:
Collapse - to collapse the group that will be represented by a single icon. •
•
•
Expand - to expand the SIM group, in detail.
Add to group - add a candidate to a group. Clicking this option will reveal the following screen for the user to enter a
password for authentication from the Candidate Switch before being added to the SIM group. Click OK to enter the
password or Cancel to exit the window.
Figure 6- 46. Input password window.
Property - to pop up a window to display the device information, as shown below. •
Figure 6- 47. Device Property window.
This window holds the following information:
Parameter Description
Device Name
This field will display the Device Name of the switches in the SIM group configured by the
user. If no Device Name is configured by the name, it will be given the name default and
tagged with the last six digits of the MAC Address to identify it.
Module Name
Displays the full module name of the switch that was right-clicked.
MAC Address
Displays the MAC Address of the corresponding Switch.
63
To Next Page
Loading...
