EasyManua.ls Logo

D-Link DES-3010G - Authenticator State

D-Link DES-3010G
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
this Authenticator.
Rx RespId
The number of EAP Resp/Id frames that have been received by this Authenticator.
Rx Resp
The number of valid EAP Response frames (other than Resp/Id frames) that have been
received by this Authenticator.
Rx Invalid
The number of EAPOL frames that have been received by this Authenticator in which the
frame type is not recognized.
Rx Error
The number of EAPOL frames that have been received by this Authenticator in which the
Packet Body Length field is invalid.
Last Version
The protocol version number carried in the most recently received EAPOL frame.
Last Source
The source MAC address carried in the most recently received EAPOL frame.
Authenticator State
The following section describes the 802.1X Status on the Switch. To view the Authenticator State, click Monitoring > Port
Access Control > Authenticator State.
Figure 11- 27. Authenticator State window – Port-based 802.1x
162

Table of Contents

Other manuals for D-Link DES-3010G

Related product manuals