DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
DSCP Priority Settings
Use the DSCP Priority Settings menu to configure DSCP priorit
mapping for Class of Service on the Switch. When a packet is
received containing this DSCP tag, it will be mapped to the CoS
queue configured here. These settings will only take effect if at leas
one of the priority settings per port is configured for DSCP.
Type the DSCP bit level and the Class ID priority from the pull-
down menu mapped to and click the Apply
utton. The new
mapping is displayed in the DSCP Priority Table below.
Figure 8- 9. DSCP Priority Setting
99
To Next Page
Loading...
