D-Link DES-3010G - Authenticator Diagnostics

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Authenticator Diagnostics
This table contains the diagnostic information regarding the operation of the Authenticator associated with each port. An entry
appears in this table for each port that supports the Authenticator function. To view the Authenticator Diagnostics, click
Monitoring > Port Access Control > Authenticator Diagnostics.
Figure 11- 24. Authenticator Diagnostics window
The user may select the desired time interval to update the statistics, between 1s and 60s, where “s” stands for seconds. The
default value is one second.
The following fields can be viewed:
Parameter Description
Port
The identification number assigned to the Port by the System in which the Port resides.
EntersConnecting
Counts the number of times that the state machine transitions to the CONNECTING
state from any other state.
EapLogOffsConnecting
Counts the number of times that the state machine transitions from CONNECTING to
DISCONNECTED as a result of receiving an EAPOL-Logoff message.
EntersAuthenticating
Counts the number of times that the state machine transitions from CONNECTING to
AUTHENTICATING, as a result of an EAP-Response/Identity message being received
from the Supplicant.
SuccessAuthenticating
Counts the number of times that the state machine transitions from
AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication
state machine indicating successful authentication of the Supplicant (authSuccess =
TRUE).
TimeoutsAuthenticating
Counts the number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of the Backend Authentication state
machine indicating authentication timeout (authTimeout = TRUE).
FailAuthenticating
Counts the number of times that the state machine transitions from
AUTHENTICATING to HELD, as a result of the Backend Authentication state machine
indicating authentication failure (authFail = TRUE).
ReauthsAuthenticating
Counts the number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of a reauthentication request
(reAuthenticate = TRUE).
EapStartsAuthenticating
Counts the number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being
received from the Supplicant.
EapLogOffAuthenticating
Counts the number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being
received from the Supplicant.
158