DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
ReauthsAuthenticated
Counts the number of times that the state machine transitions from AUTHENTICATED
to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).
EapStartsAuthenticated
Counts the number of times that the state machine transitions from AUTHENTICATED
to CONNECTING, as a result of an EAPOL-Start message being received from the
Supplicant.
EapLogOffAuthenticated
Counts the number of times that the state machine transitions from AUTHENTICATED
to DISCONNECTED, as a result of an EAPOL-Logoff message being received from
the Supplicant.
Responses
Counts the number of times that the state machine sends an initial Access-Request
packet to the Authentication server (i.e., executes sendRespToServer on entry to the
RESPONSE state). Indicates that the Authenticator attempted communication with the
Authentication Server.
AccessChallenges
Counts the number of times that the state machine receives an initial Access-
Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing
exit from the RESPONSE state). Indicates that the Authentication Server has
communication with the Authenticator.
OtherReqToSupp
Counts the number of times that the state machine sends an EAP-Request packet
(other than an Identity, Notification, Failure, or Success message) to the Supplicant
(i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator
chose an EAP-method.
ResponsesFromSupplicant
Counts the number of times that the state machine receives a response from the
Supplicant to an initial EAP-Request, and the response is something other than EAP-
NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from
REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the
Supplicant can respond to the Authenticator’s chosen EAP-method.
AuthSuccesses
Counts the number of times that the state machine receives an Accept message from
the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from
RESPONSE to SUCCESS). Indicates that the Supplicant has successfully
authenticated to the Authentication Server.
AuthFails
Counts the number of times that the state machine receives a Reject message from
the Authentication Server (i.e., aFail becomes TRUE, causing a transition from
RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the
Authentication Server.
159
To Next Page
Loading...
