DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be retained
while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default parameters into
the Switch’s non-volatile RAM, and then restart the Switch. All other options enter the
factory defaults into the current configuration, but do not save this configuration.
Reset System will return the Switch’s configuration to the state it was when it left the
factory
Figure 11- 29. Factory Reset to Default Value window
164
To Next Page
Loading...
