DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
Port Mapping Priority CoS
Use the Port Mapping Priority Settings menu to configure priority mapping for Class of Service on the Switch. Port Mapping
Priority CoS can only be used if it has been previously configured for the selected ports in the Priority Setting menu. There are
two Class of Service levels available.
Figure 8- 10. Port Mapping Priority CoS
Use the From/To menu to select the ports being configured, the selected ports must first be configured for port-based priority in
the Priority Setting menu. Select the Class level for the port(s), there are two levels 3 for high priority and 0 for low priority.
100
To Next Page
Loading...
