3.14. DHCPServer
Description
A DHCP Server determines a set of IP addresses and host configuration parameters to hand out to
DHCP clients attached to a given interface.
Properties
Index
The index of the object, starting at 1. (Identifier)
Name
Specifies a symbolic name for the DHCP Server
rule. (Identifier)
Interface
The source interface to listen for DHCP requests on.
This can be a single interface or a group of inter-
faces.
RelayerFilter
A range, group or network that will allow specific
DHCP Relayers access to the DHCP Server.
(Default: 0/0)
IPAddressPool
A range, group or network that the DHCP Server
will use as IP address pool to give out DHCP leases
from.
Netmask
Netmask sent to the DHCP Client.
DefaultGateway
Specifies what IP should be sent to the client for use
as default gateway. If unspecified or if 0.0.0.0 is spe-
cified, the IP given to the client will be sent as gate-
way. (Optional)
Domain
Domain name used for DNS resolution. (Optional)
LeaseTime
The time, in seconds, that a DHCP lease should be
provided to a host after this the client have to renew
the lease. (Default: 86400)
DNS1
IP of the primary DNS server. (Optional)
DNS2
IP of the secondary DNS server. (Optional)
NBNS1
IP of the primary Windows Internet Name Service
(WINS) server that is used in Microsoft environ-
ments which uses the NetBIOS Name Servers
(NBNS) to assign IP addresses to NetBIOS names.
(Optional)
NBNS2
IP of the primary Windows Internet Name Service
(WINS) server that is used in Microsoft environ-
ments which uses the NetBIOS Name Servers
(NBNS) to assign IP addresses to NetBIOS names.
(Optional)
NextServer
IP address of next server in the boot process.
(Optional)
LogEnabled
Enable logging. (Default: Yes)
3.14. DHCPServer Chapter 3. Configuration Reference
103
To Next Page
Loading...
