3.35. LinkMonitor
Description
The Link Monitor allows the system to monitor one or more hosts and take action if they are un-
reachable.
Properties
Action
Specifies what action the system should take.
Addresses
Specifies the addresses that should be monitored.
MaxLoss
A single host is considered unreachable if this num-
ber of consecutive ping responses to that host are not
replied to. (Default: 7)
PingInterval
Milliseconds between each monitor attempt.
(Default: 250)
InitGracePeriod
Do not allow triggering of the link monitor for this
number of seconds after the last reconfiguration.
(Default: 45)
UseSharedIP
Use the shared IP of an HA cluster instead of the
private IP of the node. (Default: No)
Comments
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
3.35. LinkMonitor Chapter 3. Configuration Reference
142
To Next Page
Loading...
