D-Link DFL-260E

Options
-abort
Abort a running self test.
-burnin
Run burn-in tests for a selected set of sub tests.
-cryptoaccel
Verify the correct functioning of available crypto ac-
celerator cards.
-hours[=<Integer>]
Test duration in hours. (Default: 48)
-interfaces=<Interface>
Ethernet interface(s).
-mac
Check if there are MAC address collisions on the in-
terfaces.
-media
Check the sanity of the disk drive.
-memory
Check the sanity of the RAM.
-minutes[=<Integer>]
Test duration in minutes. (Default: 0)
-num=<Integer>
Number of times to execute the test. (Default: 1)
-ping
Run a ping test over the interfaces.
-size=<Integer>
Size of media space to utilize in the test. Set in MB.
(Default: 1)
-throughput
Run a throughput test over the interfaces. This will
show the maximal achievable interface throughput.
-traffic
Run a traffic test over the interfaces. The traffic test
uses mixed frame sizes and verifies the content of
each received frame.
Note
Requires Administrator privilege.
2.2.47. services
Show runtime values of configured services.
Description
Shows the runtime values of all configured services.
Example 2.15. List all services which names begin with "http"
services http*
Usage
2.2.47. services Chapter 2. Command Reference
59