D-Link DFL-260E

Properties
SSLVPNBeforeRules
Pass SSL VPN connections sent to the security gate-
way directly to the SSL VPN engine without con-
sulting the ruleset. (Default: Yes)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
3.52.21. StateSettings
Description
Parameters for the state engine in the system.
Properties
ConnReplace
What to do when the connection table is full.
(Default: ReplaceLog)
LogOpenFails
Log packets that are neither part of open connections
nor valid new connections. (Default: Yes)
LogReverseOpens
Log reverse connection attempts through an estab-
lished connection. (Default: Yes)
LogStateViolations
Log packets that violate stateful tracking rules; for
instance, TCP connect sequences. (Default: Yes)
LogConnections
Log connections opening and closing. (Default: Log)
LogConnectionUsage
Log for every packet that passes through a connec-
tion. (Default: No)
MaxConnections_Dynamic
Allocate the Max Connection value dynamically.
(Default: Yes)
MaxConnections
Maximum number of simultaneous connections.
(Default: 8192)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
3.52.22. TCPSettings
Description
Settings related to the TCP protocol.
3.52.21. StateSettings Chapter 3. Configuration Reference
187