3.18. HighAvailability
Description
Configure the High Availability cluster parameters for this system.
Properties
Enabled
Enable high availability. (Default: No)
ClusterID
A (locally) unique cluster ID to use in identifying
this group of HA security gateways. (Default: 0)
SyncIface
Specifies the interface used for state synchroniza-
tion.
NodeID
Master or Slave. (Default: Master)
HASyncBufSize
How much sync data, in KB, to buffer while waiting
for acknowledgments from the cluster peer. (Default:
1024)
HASyncMaxPktBurst
The maximum number of state sync packets to send
in a burst. (Default: 20)
HAInitialSilence
The number of seconds to stay silent on startup or
after reconfiguration. (Default: 5)
UseUniqueSharedMac
Use a unique shared mac address for each interface.
(Default: Yes)
HADeactivateBeforeReconf
Deactivate(hand over) before Reconfiguration if
Active. (Default: Yes)
ReconfFailoverTime
Number of non-responsive seconds before failover at
HA reconf (0=immediate failover). (Default: 0)
HAFailoverTime
Number of milliseconds before failover when active
HA node becomes non-responsive. (Default: 750)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
3.18. HighAvailability Chapter 3. Configuration Reference
111
To Next Page
Loading...
