D-Link DFL-260E

3.45.3. RemoteMgmtSSH
Description
Configure a Secure Shell (SSH) Server to enable remote management access to the system.
Properties
Name
Specifies a symbolic name for the SSH server.
(Identifier)
Interface
Specifies the interface for which remote access is
granted.
Port
The listening port for the SSH server. (Default: 22)
AllowAuthMethodPassword
Allow password client authentication. (Default: Yes)
AllowAuthMethodPublicKey
Allow public key client authentication. (Default:
Yes)
AllowHostKeyDSA
Allow DSA public key algorithm. (Default: Yes)
AllowHostKeyRSA
Allow RSA public key algorithm. (Default: Yes)
AllowKexDH14
Allow Diffie-Hellman Group 14 key exchange al-
gorithm. (Default: Yes)
AllowKexDH1
Allow Diffie-Hellman Group 1 key exchange al-
gorithm. (Default: Yes)
AllowAES128
Allow AES-128 encryption algorithm. (Default:
Yes)
AllowAES192
Allow AES-192 encryption algorithm. (Default:
Yes)
AllowAES256
Allow AES-256 encryption algorithm. (Default:
Yes)
AllowBlowfish
Allow Blowfish encryption algorithm. (Default:
Yes)
Allow3DES
Allow 3DES encryption algorithm. (Default: Yes)
AllowMACSHA1
Allow SHA1 integrity algorithm. (Default: Yes)
AllowMACMD5
Allow MD5 integrity algorithm. (Default: Yes)
AllowMACSHA196
Allow SHA1-96 integrity algorithm. (Default: Yes)
AllowMACMD596
Allow MD5-96 integrity algorithm. (Default: Yes)
Banner
Specifies the greeting message to display when the
user logs in. (Optional)
MaxSessions
The maximum number of clients that can be connec-
ted at the same time. (Default: 5)
SessionIdleTime
The number of seconds a user can be idle before the
session is closed. (Default: 1800)
3.45.3. RemoteMgmtSSH Chapter 3. Configuration Reference
157