D-Link DFL-260E

ParameterProblemCodes
Specifies which Parameter Problem message codes
should be matched. (Default: 0-255)
EchoReply
Enable matching of Echo Reply messages. (Default:
No)
EchoReplyCodes
Specifies which Echo Reply message codes should
be matched. (Default: 0-255)
SourceQuenching
Enable matching of Source Quenching messages.
(Default: No)
SourceQuenchingCodes
Specifies which Source Quenching message codes
should be matched. (Default: 0-255)
TimeExceeded
Enable matching of Time Exceeded messages.
(Default: No)
TimeExceededCodes
Specifies which Time Exceeded message codes
should be matched. (Default: 0-255)
PassICMPReturn
Enable passing an ICMP error message only if it is
related to an existing connection using this service.
(Default: No)
ALG
An Application Layer Gateway (ALG), capable of
managing advanced protocols, can be specified for
this service. (Optional)
MaxSessions
Specifies how many concurrent sessions that are per-
mitted using this service. (Default: 200)
Comments
Text describing the current object. (Optional)
3.51.3. ServiceICMPv6
Description
An IPv6-ICMP Service is an object definition representing IPv6-ICMP traffic with specific paramet-
ers.
Properties
Name
Specifies a symbolic name for the service.
(Identifier)
MessageTypes
Specifies the IPv6-ICMP message types that are ap-
plicable to this service. (Default: All)
EchoRequest
Enable matching of Echo Request messages.
(Default: No)
EchoRequestCodes
Specifies which Echo Request message codes should
be matched. (Default: 0-255)
EchoReply
Enable matching of Echo Reply messages. (Default:
No)
EchoReplyCodes
Specifies which Echo Reply message codes should
3.51.3. ServiceICMPv6 Chapter 3. Configuration Reference
168