3.26. IGMPSetting
Description
IGMP parameters can be tuned for one, or a group of interfaces in order to match the characteristics
of a network.
Properties
Name
Specifies a symbolic name for the object. (Identifier)
Interface
The interfaces that these settings should apply to.
RobustnessVariable
IGMP is robust to (Robustness Variable - 1) packet
losses. (Default: 2)
MaxRequestsPerSecond
Maximum number of IGMP requests to process each
second and interface. (Default: 100)
RouterVersion
Multiple IGMP querying routers on a network must
use the same IGMP version. (Default: IGMPv3)
LowestCompatibleVersion
The lowest IGMP version to allow on incoming re-
quests. (Default: IGMPv1)
QueryInterval
The interval between general queries sent by the se-
curity gateway. (Default: 125000)
QueryResponseInterval
The maximum time until a host (client) has to send
an answer to a query. (Default: 10000)
LastMemberQueryInterval
The maximum time until a host (client) has to send
an answer to a group and group-and-source specific
query. (Default: 10000)
LastMemberQueryCount
The number of group and group-and-source specific
queries sent until the security gateway decides there
are no more subscribers to a specific multicast
group. (Default: 2)
StartupQueryInterval
The general query interval to use during the startup
phase. (Default: 30000)
StartupQueryCount
The number of startup queries to send during the
startup phase. (Default: 2)
UnsolicatedReportInterval
The time between repetitions of a host's initial mem-
bership reports to a group. (Default: 1000)
ReactToOwnQueries
Should the system respond to Member Report Quer-
ies orginating from itself. (Default: No)
Comments
Text describing the current object. (Optional)
3.26. IGMPSetting Chapter 3. Configuration Reference
121
To Next Page
Loading...
