<Num>
Decode given buffer number.
2.2.9. cam
CAM table information.
Description
Show information about the CAM table(s) and their entries.
Usage
cam -num=<n>
Show CAM table information.
cam <Interface> [-num=<n>]
Show interface-specified CAM table information.
cam <Interface> [-flush]
Flush CAM table information of specified interface.
cam -flush
Flush CAM table information.
Options
-flush
Flush CAM table. If interface is specified, only
entries using this interface are flushed. (Admin only)
-num=<n>
Limit list to <n> entries per CAM table. (Default:
20)
<Interface>
Interface.
2.2.10. cfglog
Display configuration log.
Description
Display the log of the last configuration read attempt.
Usage
cfglog
2.2.9. cam Chapter 2. Command Reference
35
To Next Page
Loading...
