D-Link DFL-260E

2.2.16. dhcpserver
Show content of the DHCP server ruleset.
Description
Show the content of the DHCP server ruleset and various information about active/inactive leases.
Display filter filters leases based on interface/mac/ip (example: if1 192.168.*)
Usage
dhcpserver
Show DHCP server leases.
dhcpserver -show [-rules] [-leases] [-num=<Integer>]
[-fromentry=<Integer>] [-mappings] [<display filter>]...
Show DHCP server ruleset.
dhcpserver -release={BLACKLIST}
Release a specific types of IPs.
dhcpserver -releaseip <interface> <ip address>
Release an active IP.
Options
-fromentry=<Integer>
Shows dhcp server lease list from offset <n>.
-leases
Show DHCP server leases.
-mappings
Show DHCP server IP mappings.
-num=<Integer>
Limit list to <n> leases.
-release={BLACKLIST}
Release specific type of IPs. (Admin only)
-releaseip
Release an active IP. (Admin only)
-rules
Show DHCP server rules.
-show
Show ruleset.
<display filter>
Display filters for leases based on interface/mac/ip
(eg. if1 192.168.*).
<interface>
Interface.
<ip address>
IP address.
2.2.17. dns
2.2.17. dns Chapter 2. Command Reference
39