-allindepth
Show in-depth information about all interfaces.
-filter=<expr>
Filter list of interfaces.
-num=<n>
Limit list to <n> lines. (Default: 20)
-pbr=<table name>
Only list members of given PBR table(s).
-restart
Stop and restart the interface. (Admin only)
<Interface>
Name of interface.
2.2.27. igmp
IGMP Interfaces.
Description
Show information about the current state of the IGMP interfaces.
Send simulated messages to test configuration of the interface.
Usage
igmp
Prints the current IGMP state.
igmp -state [<Interface>]
Prints the current IGMP state. If an interface is specified, more details are provided.
igmp -query <Interface> [<MC address> [<router address>]]
Simulate an incoming IGMP query message.
igmp -join <Interface> <MC address> [<host address>]
Simulate an incoming IGMP join message.
igmp -leave <Interface> <MC address> [<host address>]
Simulate an incoming IGMP leave message.
Options
-join
Simulate an incoming IGMP join message.
-leave
Simulate an incoming IGMP leave message.
-query
Simulate an incoming IGMP query message.
-state
Show the current IGMP state.
2.2.27. igmp Chapter 2. Command Reference
45
To Next Page
Loading...
