D-Link DFL-260E

arpsnoop
Show snooped interfaces.
arpsnoop {ALL | NONE | <interface>} [-verbose]
Snoop specified interface.
Options
-verbose
Verbose.
{ALL | NONE | <interface>}
Interface name.
2.2.5. ats
Show active ARP Transaction States.
Description
Show active ARP Transaction States.
Usage
ats [-num=<n>]
Options
-num=<n>
Limit list to <n> entries. (Default: 20)
2.2.6. bigpond
Show BigPond information.
Description
Show the BigPond information about specified interface.
Usage
bigpond
Show ALL BigPond information.
bigpond <interface>
2.2.5. ats Chapter 2. Command Reference
32