D-Link DFL-260E

3.39. Pipe
Description
A pipe defines basic traffic shaping parameters. The pipe rules then determines which traffic goes
through which pipes.
Properties
Name
Specifies a symbolic name for the pipe. (Identifier)
LimitKbpsTotal
Total bandwidth limit for this pipe in kilobits per
second. (Optional)
LimitPPSTotal
Total packet per second limit for this pipe.
(Optional)
LimitKbps0
Specifies the bandwidth limit in kbps for precedence
0 (the lowest precedence). (Optional)
LimitPPS0
Specifies the packet per second limit for precedence
0 (the lowest precedence). (Optional)
LimitKbps1
Specifies the bandwidth limit in kbps for precedence
1. (Optional)
LimitPPS1
Specifies the packet per second limit for precedence
1. (Optional)
LimitKbps2
Specifies the bandwidth limit in kbps for precedence
2. (Optional)
LimitPPS2
Specifies the packet per second limit for precedence
2. (Optional)
LimitKbps3
Specifies the bandwidth limit in kbps for precedence
3. (Optional)
LimitPPS3
Specifies the packet per second limit for precedence
3. (Optional)
LimitKbps4
Specifies the bandwidth limit in kbps for precedence
4. (Optional)
LimitPPS4
Specifies the packet per second limit for precedence
4. (Optional)
LimitKbps5
Specifies the bandwidth limit in kbps for precedence
5. (Optional)
LimitPPS5
Specifies the packet per second limit for precedence
5. (Optional)
LimitKbps6
Specifies the bandwidth limit in kbps for precedence
6. (Optional)
LimitPPS6
Specifies the packet per second limit for precedence
6. (Optional)
LimitKbps7
Specifies the bandwidth limit in kbps for precedence
3.39. Pipe Chapter 3. Configuration Reference
148