HoldTime
The hold time in seconds during which the log
threshold must be reached for an email to be sent.
(Default: 120)
MinRepeatDelay
The amount of seconds the security gateway will
wait before sending another email. (Default: 600)
LogThreshold
The number of events that have to occur within the
hold time for an email to be sent. (Default: 2)
Comments
Text describing the current object. (Optional)
3.37.4. LogReceiverSyslog
Description
A Syslog receiver is used to receive log events from the system in the standard Syslog format.
Properties
Name
Specifies a symbolic name for the log receiver.
(Identifier)
IPAddress
Specifies the IP address of the log receiver.
Port
Specifies the port number of the log service.
(Default: 514)
Facility
Specifies what facility is used when logging.
(Default: local0)
LogSeverity
Specifies with what severity log events will be sent
to the specified log receivers. (Optional; Default:
Emer-
gency,Alert,Critical,Error,Warning,Notice,Info)
Comments
Text describing the current object. (Optional)
3.37.4.1. LogReceiverMessageException
The definitions here are the same as in Section 3.37.1.1, “LogReceiverMessageException” .
3.37.4. LogReceiverSyslog Chapter 3. Configuration Reference
146
To Next Page
Loading...
