D-Link DFL-260E

interface. (Optional)
EnableIPv6
TODO. (Default: No)
IPv6IP
Specifies the IP address of the virtual LAN interface.
IPv6Network
Specifies the network of the virtual LAN interface.
IPv6DefaultGateway
The default gateway of the virtual LAN interface.
(Optional)
PrivateIP
The private IP address of this high availability node.
(Optional)
Metric
Specifies the metric for the auto-created route.
(Default: 100)
AutoSwitchRoute
Enable transparent mode, which means that a switch
route is added automatically for this virtual LAN in-
terface. (Default: No)
AutoInterfaceNetworkRoute
Automatically add a route for this virtual LAN inter-
face using the given network. (Default: Yes)
AutoDefaultGatewayRoute
Automatically add a default route for this virtual
LAN interface using the given default gateway.
(Default: Yes)
PrioCopyPolicy
Set the QoS to VLAN priority copy policy. (Default:
InheritFromPhys)
EnableRouterAdvertisement
Enable Router Advertisement for this interface.
(Default: No)
Comments
Text describing the current object. (Optional)
3.28.10. VLAN Chapter 3. Configuration Reference
133