ReachabilityCount
Minimum number of reachable hosts to consider the
route to be active.
Metric
Specifies the metric for this route. (Default: 0)
ProxyARPAllInterfaces
Always select all interfaces, including new ones, for
publishing routes via Proxy ARP. (Default: No)
ProxyARPInterfaces
Specifies the interfaces on which the security gate-
way should publish routes via Proxy ARP.
(Optional)
Comments
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
3.49.2.1. MonitoredHost
Description
Specify a host and a monitoring method.
Properties
Method
Monitoring method. (Default: ICMP)
IPAddress
Specifies the IP address of the host to monitor.
Port
Specifies the TCP port to monitor.
PollingInterval
Delay in milliseconds between each monitor attempt.
(Default: 10000)
ReachabilityRequired
Specifies if this host is required to be reachable for
monitoring to be successful. (Default: No)
Samples
Specifies the number of attempts to use for statistical
calculations. (Default: 10)
MaxPollFails
Specifies the maximum number of failed attempts
until host is considered to be unreachable. (Default:
2)
MaxAverageLatency
Specifies the max average latency for the sample at-
tempts. (Default: 800)
RequestURL
Specifies the HTTP URL to monitor.
ExpectedResponse
Expected HTTP response.
Comments
Text describing the current object. (Optional)
3.49.2. Route Chapter 3. Configuration Reference
164
To Next Page
Loading...
