D-Link DGS-1210-08P - Page 166

Appendix B - Technical Specifications D-Link Smart Managed Switch User Manual
1
1
5
5
9
9
Support manual/auto MDI/MDIX configuration
Support Auto-Negotiation for each port
SFP ports
Port 9 ~ 10 for DGS-1210-08P
SFP ports comply with following standards:
- IEEE 802.3u compliance (Support 100M transceivers)
- IEEE 802.3z compliance
- IEEE 802.3ah compliance
Support Transceivers:
- 100M/1000M SFP Transceivers
- WDM SFP Transceivers
- 1000BASE-T Transceivers
Combo ports
4 combo 1000BASE-T/SFP ports for DGS-1210-16/24/24P/48
SFP Transceivers Supported:
- DGS-712 (1000Base-T)
- DEM-210 (100BASE-FX, 15km)
- DEM-211 (100BASE-FX, 2km)
- DEM-310GT (1000BASE-LX, 10km)
- DEM-311GT (1000BASE-SX, 550m)
- DEM-314GT (1000BASE-LH, 50km)
- DEM-315GT (1000BASE-ZX, 80km)
- DEM-312GT2 (1000BASE-SX, 2km)
WDM Transceivers Supported:
- DEM-220T (100Base-BX,TX-1550/RX-1310nm, 20km)
- DEM-220R (100Base-BX,TX-1310/RX-1550nm, 20km)
- DEM-330T (1000Base-BX,TX-1550/RX-1310nm, 10km)
- DEM-330R (1000Base-BX,TX-1310/RX-1550nm, 10km)
- DEM-331T (1000Base-BX,TX-1550/RX-1310nm, 40km)
- DEM-331R (1000Base-BX,TX-1310/RX-1550nm, 40km)
Physical & Environment
Power Consumption
DGS-1210-08P:
Maximum power consumption: 81.9 Watts (PoE On), 7.6 Watts (PoE Off)
Standby power consumption: 2.5 Watts
DGS-1210-16:
Maximum power consumption: 13.08 Watts
Standby power consumption: 5.56 Watts
DGS-1210-24:
Maximum power consumption: 17.32 Watts
Standby power consumption: 6.55 Watts
DGS-1210-24P: