4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
2
2
3
3
Figure 4.4 – SNMP in Smart Wizard
NOTE: Changing the system IP address will
disconnect you from the current connection.
Please enter the correct IP address in the Web
browser again and make sure your PC is in the
same subnet with the switch. See Login Web-
based Management for a detailed description.
NOTE: Standard
Mode and Surveillance Mode
Web UIs share the same configuration files. Any
features enables in one interface will be made
available in the other interface, for example: PoE
scheduling, SNMP settings and the surveillance
VLAN in use.
If you want to change the settings, click Apply and start a new web browser.
Figure 4.5 – Confirm the changes of IP address in Smart Wizard
To Next Page
Loading...
