D-Link DGS-1510/ME Series - Page 292

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
288
Example
To enable DHCP IPv4 snooping mode:
DGS-1510-28XMP/ME:admin# enable address_binding dhcp_snoop
Command: enable address_binding dhcp_snoop
Success.
DGS-1510-28XMP/ME:admin#
32-10 disable address_binding dhcp_snoop
Description
This command is used to disable DHCP snooping mode. When the DHCP snooping function is disabled, all of the
auto-learned binding entries will be removed.
Format
disable address_binding dhcp_snoop
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable DHCP IPv4 snooping mode:
DGS-1510-28XMP/ME:admin# disable address_binding dhcp_snoop
Command: disable address_binding dhcp_snoop
Success.
DGS-1510-28XMP/ME:admin#
32-11 clear address_binding dhcp_snoop binding_entry ports
Description
This command is used to clear the DHCP snooping entries learned for the specified ports.
Format
clear address_binding dhcp_snoop binding_entry ports [<portlist> | all]
Parameters
<portlist> - Enter the list of ports used.