D-Link DGS-1510/ME Series - Page 357

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
353
Example
To enable the MAC-based Access Control global state:
DGS-1510-28XMP/ME:admin# enable mac_based_access_control
Command: enable mac_based_access_control
Success.
DGS-1510-28XMP/ME:admin#
42-2 disable mac_based_access_control
Description
This command is used to disable MAC-based Access Control.
Format
disable mac_based_access_control
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the MAC-based Access Control global state:
DGS-1510-28XMP/ME:admin# disable mac_based_access_control
Command: disable mac_based_access_control
Success.
DGS-1510-28XMP/ME:admin#
42-3 config mac_based_access_control password
Description
This command is used to configure the RADIUS authentication password for MAC-based Access Control.
Format
config mac_based_access_control password <passwd 16>