DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
354
Parameters
<password> - Enter the password used here. The maximum length of the key is 16. The default password is
“default”.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the MAC-based Access Control password:
DGS-1510-28XMP/ME:admin# config mac_based_access_control password switch
Command: config mac_based_access_control password switch
Success.
42-4 config mac_based_access_control method
Description
This command is used to configure the MAC-based Access Control authentication method.
Format
config mac_based_access_control method [local | radius]
Parameters
local - Specifies to authenticate via the local database.
radius - Specifies to authenticate via a RADIUS server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the MAC-based Access Control authentication method as local:
DGS-1510-28XMP/ME:admin# config mac_based_access_control method local
Command: config mac_based_access_control method local
Success.
To Next Page
Loading...
