D-Link DGS-1510/ME Series - Page 413

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
409
Restrictions
None.
Example
To show the limited multicast address range on ports 1 and 3:
DGS-1510-28XMP/ME:admin# show limited_multicast_addr ports 1,3
Command: show limited_multicast_addr ports 1,3
Port : 1
Access : Deny
Profile ID Name Multicast Addresses
----------- ----------- ----------------------------
1 customer 224.19.62.34 - 224.19.162.200
Port : 3
Access : Deny
Profile ID Name Multicast Addresses
----------- ---------------- ----------------------------
1 customer 224.19.62.34 - 224.19.162.200
DGS-1510-28XMP/ME:admin#
To show the limited multicast settings configured on VLAN 1:
DGS-1510-28XMP/ME:admin# show limited_multicast_addr vlan 1
Command: show limited_multicast_addr vlan 1
VLAN ID : 1
Access : Deny
Profile ID Name Multicast Addresses
---------- ----------------- -----------------------------
1 customer 224.19.62.34 - 224.19.162.200
Success.
DGS-1510-28XMP/ME:admin#
47-10 config cpu_filter l3_control_pkt
Description
This command is used to configure the port state for the Layer 3 control packet filter.