D-Link DGS-1510/ME Series - Page 476

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
472
Example
To display PPPoE circuit ID insertion status:
DGS-1510-28XMP/ME:admin# show pppoe circuit_id_insertion
Command: show pppoe circuit_id_insertion
Global PPPoE State: Enabled
DGS-1510-28XMP/ME:admin#
57-4 show pppoe circuit_id_insertion ports
Description
This command is used to display Switch’s port PPPoE Circuit ID insertion configuration.
Format
show pppoe circuit_id_insertion ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies a list of ports to be displayed.
Restrictions
None.
Example
To display port 2-5 PPPoE circuit ID insertion configuration:
DGS-1510-28XMP/ME:admin# show pppoe circuit_id_insertion ports 2-5
Command: show pppoe circuit_id_insertion ports 2-5
Port State Circuit ID
---- -------- ---------------------------------------------
2 Enabled Switch IP
3 Enabled Switch IP
4 Enabled Switch IP
5 Enabled Switch IP
DGS-1510-28XMP/ME:admin#