DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
100
Click the Apply button to accept the changes made.
After selecting the MAC Address Port Learning Settings tab option, at the top of the page, the following page will be
available.
Figure 5-4 MAC Address Table Settings (MAC Address Port Learning Settings) Window
The fields that can be configured are described below:
Parameter Description
Unit Select the stacking unit ID of the Switch that will be configured here.
From Port - To Port Select the range of ports that will be used for this configuration here.
Status Select to enable or disable the MAC address learning function on the ports
specified here.
Click the Apply button to accept the changes made.
After selecting the MAC Address VLAN Learning Settings tab option, at the top of the page, the following page will
be available.
Figure 5-5 MAC Address Table Settings (MAC Address VLAN Learning Settings) Window
To Next Page
Loading...
