DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
434
• The Switch will reset to its factory default settings and not reboot. This option excludes the stacking information.
Click the Apply button to initiate the reset.
Reboot System
This window is used to reboot the Switch and alternatively save the configuration before doing so.
To view the following window, click Tools > Reboot System, as shown below:
Figure 13-18 Reboot System Window
When rebooting the Switch, any configuration changes that was made during this session, will be lost unless the Yes
option is selected when asked to save the settings.
Click the Reboot button to alternatively save the settings and reboot the Switch.
Figure 13-19 Reboot System (Rebooting) Window
To Next Page
Loading...
