DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
14
Figure 3-9 Jumbo Frame Window
The fields that can be configured are described below:
Parameter Description
Unit Select the stacking unit ID of the Switch that will be configured here.
From Port - To Port Select the appropriate port range used for the configuration here.
Maximum Receive Frame
Size
Enter the maximum receive frame size value here. This value must be between
64 and 12288 bytes. By default, this value is 1536 bytes.
Click the Apply button to accept the changes made.
Interface Description
This window is used to display the status, administrative status, and description of each port on the Switch.
To view the following window, click System > Interface Description, as shown below:
Figure 3-10 Interface Description Window
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
