DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
179
Figure 5-90 LLDP-MED Port Settings Window
The fields that can be configured are described below:
Parameter Description
Unit Select the Switch unit that will be used for this configuration here.
From Port - To Port Select the appropriate port range used for the configuration here.
Notification Select this option to enable or disable transmitting the LLDP-MED notification
TLV.
Capabilities
Select this option to enable or disable transmitting the LLDP-MED capabilities
TLV.
Inventory Select this option to enable or disable transmitting the LLDP-MED inventory
management TLV.
Network Policy Select this option to enable or disable transmitting the LLDP-MED network
policy TLV.
Click the Apply button to accept the changes made.
LLDP Statistics Information
This window is used to view the neighbor detection activity, LLDP Statistics and the settings for individual ports on the
Switch.
To view the following window, click L2 Features > LLDP > LLDP Statistics Information, as shown below:
To Next Page
Loading...
